Product Parameters
| Item | Specification |
|---|---|
| Material | Carbon Steel, Stainless Steel (304/316) |
| Thickness | 3 mm – 15 mm |
| Surface | Powder Coating, Zinc Plated, Galvanized |
| Load Capacity | Up to 500 kg per bracket |
| MOQ | 10 pcs |
description
Steel wall mount brackets provide reliable attachment points for equipment, shelving, and structural supports - the anchor point that keeps everything in place under significant load without flexing or pulling away from the wall. Carbon steel handles most industrial mounting applications with formable strength and corrosion-protective finishes. Stainless steel takes on outdoor installations, marine applications, and food-processing facilities where corrosion resistance is essential. Thickness selection balances strength against cost. Reinforcement ribs and gussets can add stiffness without going to thicker material.
Wall Anchoring - The Real Constraint
A bracket that can hold 500 kg in a tensile pull-out test means nothing if the wall it mounts to cannot take that load. Drywall over studs: toggle bolts or structural screws into the studs. Concrete or block: concrete anchors rated for the load. We specify brackets with adequate load ratings but the anchor selection and wall condition are your responsibility during installation.
FAQ
Q1: MOQ?
A1: 10 pieces.
Q2: Load capacity?
A2: Up to 500 kg per bracket depending on configuration and mounting method.
Q3: Surface finishes?
A3: Powder coating, zinc plating, hot-dip galvanized.
Q4: Custom configurations?
A4: Yes. Custom geometries, hole patterns, angle adjustments.
Q5: Materials?
A5: Carbon steel and stainless steel (304/316).
Q6: Prototype support?
A6: Yes. Small prototype runs available before production orders.
Quality is non-negotiable in precision manufacturing. Every component undergoes rigorous inspection at each stage of production.
- ISO 9001:2015 - Certified quality management system covering design, machining, and inspection
- Passivation / Electropolishing - ASTM A967 procedures for corrosion resistance
- Material Traceability - Heat number tracking from raw material to finished part
- First Article Inspection (FAI) - Full dimensional report included with every new order
From raw material to finished product, every step is controlled and documented:
- Material Preparation - CNC turning/milling to near-net shape
- Heat Treatment - Through-hardening or case-hardening for strength-critical parts
- Surface Preparation - Degreasing, acid cleaning, and surface activation
- Electroplating - Controlled bath process with thickness monitoring
- Sealing / Baking - Chrome sealing, anodize sealing, or hydrogen embrittlement relief baking
- Inspection - Coating thickness measurement, adhesion testing, and visual check
- Packaging - Protective interleaving, VCI packaging, and anti-tarnish wrapping
Hot Tags: steel wall mount brackets, China steel wall mount brackets manufacturers, Aluminum Support Arms, Arm Supports, Backer Plates, Bracket Plates, Mounting Bases, Wall Flanges