About This Service
CNC milling uses rotating cutting tools to remove material from solid blocks. We specialize in 5-axis milling
for parts with features on 4+ sides, undercuts, or complex 3D contours. Tolerances down to plus/minus 0.025 mm.
2 Real 5-Axis Case Studies
The numbers below are from real projects. We compared 3-axis vs 5-axis on the same parts.
Hydraulic Manifold (6061-T6)
200x150x80 mm, 8 angled ports. 3-axis: 240 min, 4 setups, field failure 1.2%. 5-axis: 95 min, 1 setup, field failure 0.1%. Result: 22% cheaper, 4x better tolerance.
Titanium Spinal Cage (Ti-6Al-4V)
25x18x8 mm, complex trabecular surface. Investment casting: 18 USD/part, 12-week lead time, 500 minimum. 5-axis milling: 28 USD/part, 3-week lead, no minimum. We support both paths.
5 Industries Where 5-Axis Is Required
Where 5-axis is not optional - it's required for the part to be made at all.
Medical Implants
Spinal cages, hip cups, dental implants. 5-axis enables single-setup machining of anatomical shapes with undercuts matching bone geometry.
01
Aerospace Components
Turbine blades, blisks, combustion liners. 5-axis reaches blade root fillets and internal cooling channels 3-axis cannot access without EDM.
02
Automotive Manifolds
Intake manifolds, turbo housings, cylinder heads. 5-axis reduces fixturing for complex intake runners and reduces scrap from setup error.
03
Optical and Laser Hardware
Lens mounts, mirror cells, telescope components. 5-axis maintains optical alignment across multiple surfaces in a single setup.
04
Robotics and AI Hardware
Harmonic drive cups, joint housings, sensor mounts. 5-axis enables complex internal features impossible on 3-axis.
05
Why Choose Our CNC Milling
5-Axis Saves 60% Time
One setup instead of 4-6. Eliminates re-fixturing. 4x better tolerance across multiple faces.
Medical Implant Ready
Titanium spinal cages, surgical instruments, biocompatible parts. ISO 13485 certified.
Aerospace-Grade Quality
Turbine blades, combustion liners, complex brackets. 5-axis reaches features 3-axis cannot.
Complex Geometry
Undercuts, angled features, curved surfaces, blisks. 5-axis enables what was impossible before.
Robotics and AI Hardware
Harmonic drive cups, joint housings, sensor mounts. Used by leading robotics companies.
plus/minus 0.025 mm Tolerance
5-axis standard, plus/minus 0.01 mm on critical features. CMM inspection per order.
Sample Products We Make
Click any product to inquire about a similar part for your application.
